Fusion Mineral Paint Tough Coat Topcoat Matte and Glossy
Fusion Mineral Paint Tough Coat can be used on those high traffic surfaces such as table tops or kitchen cupboards. Tough Coat is a non-yellowing water-based wipe on sealer, easily applied with a damp lint free cloth.
Stir or roll very gently before use. If applying to a recently painted surface, allow 12-24 hours of drying time before applying. For best results, use with a damp lint free rag and apply two coats 2-4 hours apart. In humid areas, longer drying times may be required.
The 500 ml covers about 75 sq. ft. Always test your methods and process to ensure best results. Clean up is easy with soap and warm water.
Fusion Mineral Paint Tough Coat can be used on those high traffic surfaces such as table tops or kitchen cupboards. Tough Coat is a non-yellowing water-based wipe on sealer, easily applied with a damp lint free cloth.
Stir or roll very gently before use. If applying to a recently painted surface, allow 12-24 hours of drying time before applying. For best results, use with a damp lint free rag and apply two coats 2-4 hours apart. In humid areas, longer drying times may be required.
The 500 ml covers about 75 sq. ft. Always test your methods and process to ensure best results. Clean up is easy with soap and warm water.
Fusion Mineral Paint Tough Coat can be used on those high traffic surfaces such as table tops or kitchen cupboards. Tough Coat is a non-yellowing water-based wipe on sealer, easily applied with a damp lint free cloth.
Stir or roll very gently before use. If applying to a recently painted surface, allow 12-24 hours of drying time before applying. For best results, use with a damp lint free rag and apply two coats 2-4 hours apart. In humid areas, longer drying times may be required.
The 500 ml covers about 75 sq. ft. Always test your methods and process to ensure best results. Clean up is easy with soap and warm water.
